Shot Peening Nozzles — 360°, Single Outlet and Rectangular
Tungsten carbide nozzles for shot peening hard-to-reach areas such as bore surfaces, slots, channels and blade roots. The standard types below are examples from our range; each type can be produced to any size within the min–max range given in the table.
- 360° outlet: treats the full bore circumference in one pass
- Single outlet: directed treatment of slots, channels and local areas
- Rectangular outlet: for narrow, flat areas and blade roots
- Material: tungsten carbide; boron carbide in certain geometries
Nozzle Types and Dimensions
All dimensions in the tables are in mm. Custom types are produced to any size within the min–max range. The letter codes (A, B, C…) refer to the dimensions on the technical drawing; click a drawing to enlarge it.
360° Outlet Cylindrical Nozzles
Cylindrical-body nozzle with a 360° outlet; treats the full bore circumference in one pass. Material: Tungsten carbide (WC).
| Standard type | ØA (mm) | B (mm) | ØC (mm) |
|---|---|---|---|
| 6 | 6 | 320 | 4 |
| 8 | 8 | 320 | 6 |
| 10 | 10 | 320 | 5 |
| 12 | 12 | 320 | 8 |
| 16 | 16 | 320 | 10 |
| 18 | 18 | 320 | 12 |
| 20 | 20 | 320 | 14 |
| Custom type (min–max) | 6 – 32 | 60 – 1500 | 1 – 28 |
Single Outlet Cylindrical Nozzles
Cylindrical-body nozzle with a single-direction outlet; used for directed treatment of slots, channels and local areas. Material: Tungsten carbide (WC).
| Standard type | A (mm) | B (mm) | C (mm) | D (mm) |
|---|---|---|---|---|
| 6 | 4 | 6 | 4 | 320 |
| 8 | 6 | 8 | 6 | 320 |
| 10 | 5 | 10 | 5 | 320 |
| 12 | 8 | 12 | 8 | 320 |
| 16 | 10 | 16 | 10 | 320 |
| 18 | 12 | 18 | 12 | 320 |
| 20 | 14 | 20 | 14 | 320 |
| Custom type (min–max) | 1 – 28 | 4 – 32 | 1 – 28 | 15 – 320 |
Single Outlet Rectangular Nozzles
Rectangular-section nozzle for narrow, flat areas and blade roots. The rectangular outlet leaves a wide, even blast pattern on flat and narrow areas. The D × E outlet size can be defined to suit the surface to be treated. Material: Tungsten carbide (WC).
| Standard type | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) |
|---|---|---|---|---|---|
| 6 × 17 | 340 | 17 | 6 | 2.5 | 13.5 |
| Custom type (min–max) | 30 – 320 | 5 – 60 | 5 – 60 | 1 – 50 | 1 – 50 |
Our standard material is tungsten carbide; boron carbide nozzles can also be supplied in certain geometries. For a size, angle or connection type outside the catalogue, see the information needed for a quotation.
Let Us Find the Right Nozzle for Your Application Together
Contact us for technical drawings, dimensions and a quotation for shot peening nozzles. If you send a part drawing or a sample, we can design the nozzle to suit your application.